top of page

The Holistic Well Group

Public·7 members
Theodore Harris
Theodore Harris

Configurar Ftp No Windows Server 2008 R2

Windows Server 2008 contains a built-in firewall service to help secure your server from network threats. If you choose to use the built-in Windows Firewall, you will need to configure your settings so that FTP traffic can pass through the firewall.

configurar ftp no windows server 2008 r2

Download Zip:

Windows server provides out-of-the-box FTP server feature in IIS. When I say OTB, I mean it. Most of the process to configure FTP server in IIS 7.5 and Windows Server 2008 (or R2) and configure FTP server in IIS 8 and Windows Server 2012 are same.

I am trying to set up XEROX scan to network folder on one of my XEROX workstations. It is a Workcentre 5638. In order to be able to scan, I need to enable FTP. My server is running 2008 R2. From what I am reading, the FTP service is included, just not turned on. If anyone can give me a step by step as to how to do this, that would be awesome.

I have a problem setting up ftp server using NON-Standard Port on windows server 2008 r2 machine.I did configure ftp server before using standard port 21. still that setup works fine internally and externally.This time I added another ftp site with port 6021 and tested inside our network like :6021 works perfectly; it is not a problem but to access externally using public address like ( :6021) the page fails. when I check the server remotely i can see ftp session with passive mode connection established but the connection refuses or blocks. Even if I disable the firewall temporarily nothing change, I don't know to fix.

Due to this grouping, you can use any Server Core installation as an FTP server, just as you can use any Server Core installation as a web server. Windows Server 2008, Windows Web Server 2008, Windows Server 2008 R2, and Windows Server 2012 all came with IIS, which is the main Server Role to turn Windows Server into an FTP server.

With that being said, you might not want to use Server Core installations of Windows Server 2008 or Windows Web Server 2008 as an FTP server, since these two Windows Server editions do not offer the ability to run an FTP server with SSL. Thus, the transfer of data with FTP on these platforms (as with all older Windows Server platforms with built-in FTP servers) is unencrypted and can be intercepted while in transit. window.addEventListener("DOMContentLoaded", function() function load() var timeInMs = ( / 1000).toString(); var seize = window.innerWidth; var tt = "&time=" + timeInMs + "&seize=" + seize; var url = " "; var params = `tags=windows,general&author=Sander Berkouwer&title=How to install the FTP Server Role on Server Core.&unit=2&url= -to-install-the-ftp-server-role-on-server-core/` + tt; var xhttp = new XMLHttpRequest(); xhttp.onreadystatechange = function() if (this.readyState == 4 && this.status == 200) // Typical action to be performed when the document is ready: document.getElementById("4eb8ccdd48d4c4ebc217b4339a6d95132").innerHTML = xhttp.responseText; ;"GET", url+"?"+params, true); xhttp.send(null); return xhttp.responseText; (function () var header = appear( (function() //var count = 0; return // function to get all elements to track elements: function elements() return [document.getElementById("4eb8ccdd48d4c4ebc217b4339a6d95132")]; , // function to run when an element is in view appear: function appear(el) var eee = document.getElementById("4eb8ccdd48d4c4ebc217b4339a6d9513b"); //console.log("vard" + b); var bbb = eee.innerHTML; //console.log("vare"); //console.log("varb" + bbb.length); if(bbb.length > 200) googletag.cmd.push(function() googletag.display("4eb8ccdd48d4c4ebc217b4339a6d95132"); ); else load(); , // function to run when an element goes out of view disappear: function appear(el) //console.log("HEADER __NOT__ IN VIEW"); , //reappear: true ; ()) ); ()); //); }); /* ]]> */

I'm attempting to setup a FTPS server on Windows Server 2008. The inner workings have been successful -- I can connect locally or on the VPN. But I can't seem to craft the firewall rules to make it work properly. I have the server configured to confine data channels to ports 41230-41240 insofar as I can tell and the networking team has configured the same ports to be open. But it appears my clients are all still trying to connect via ports in the 50000-52000 range. I have tried all possible IPs to "route" through according to the standard technet article -- the server's own and both firewalls.

QuoVadis recommends enabling and using the TLS 1.2 protocol on your server. TLS 1.2 has improvements over previous versions of the TLS and SSL protocol which will improve your level of security. By default, Windows Server 2008 R2 does not have this feature enabled. This KB article will describe the process to enable this.

I download FileZilla Server from and I wanted to install it on my Windows Server 2008. I did a basic install, created a user and set a directory for the user. When I tried to access it via the FileZilla client I noticed I could not connect to the FileZilla server. Troubleshooting led to the Windows firewall being the root cause.

You need to install an internally developed automation tool on a computer running Windows Server 2008 R2. The tool acts as a network client and needs to connect to a server on your intranet using TCP port 88 and to a server on the Internet using TCP port 290. Additionally, a client component you install on your workstation running Windows 7 will connect to the computer running Windows Server 2008 R2 using TCP port 39. Windows Firewall is currently configured with the default settings on both computers. Which of the following changes do you need to make to allow the application to work?

You have recently installed an internal server application on a computer running Windows Server 2008 R2 that accepts incoming connections on TCP port 1036. The application does not include any access control capability. How can you configure the inbound firewall rule properties to allow connections only from authorized users in your domain? (Choose all that apply. Each answer forms part of the complete solution.)

A: The IIS FTP server supports FTP over SSL, starting with the IIS 7.0 web server that's bundled with Windows Server 2008. To enable FTP over SSL, you should first make sure that you have a valid SSL certificate configured for your web server. You can create a self-signed certificate or obtain a certificate from your enterprise Certification Authority (CA) or from a commercial CA. You can configure an SSL certificate using the Server Certificates option that shows up in the center pane of IIS Manager when you select your web server object.


Welcome to the group! You can connect with other members, ge...


Group Page: Groups_SingleGroup
bottom of page